Other information:
Follow the steps 1 to 2 from the previous chapter.
3. Remove the headlight bulb cover by turning it counterclockwise.
4. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
5. Pull the bulb out of the socket. ...
Removal and Installation
Front Muffler
1.
Disconnect the rear oxygen sensor connector (A).
2.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ ...