Kia Carens: Manual climate control system / System operation

Kia Carens RP (2013-2018) Owners Manual / Features of your vehicle / Manual climate control system / System operation

Ventilation

1. Set the mode to the position.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

Heating

1. Set the mode to the position.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

5. If dehumidified heating is desired, turn the air conditioning system on.

• If the windshield fogs up, set the mode to the position.

Operation Tips

Air conditioning (if equipped)

Kia Air Conditioning Systems are filled with environmentally friendly refrigerant*.

1. Start the engine. Push the air conditioning button.

2. Set the mode to the position.

3. Set the air intake control to the outside air or recirculated air position.

4. Adjust the fan speed control and temperature control to maintain maximum comfort.

CAUTION

✽ NOTICE

Air conditioning system operation tips

Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light will illuminate). Press the button again to turn the air conditioning system off. ...

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If du ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: LCD Display Control


The LCD display modes can be changed by using the control buttons on the steering wheel. [Type A] (1) : TRIP button for changing trip modes (2) : RESET button for resetting items [Type B] (1) : MODE button for changing modes or SELECT button for setting the selected item (2) : MOVE button for cha ...

Kia Carens RP (2013-2018) Owners Manual: Static bending light


Follow the steps 1 to 2 from the previous chapter. 3. Remove the headlight bulb cover by turning it counterclockwise. 4. Disconnect the headlight bulb socket-connector. 5. Unsnap the headlight bulb retaining wire by depressing the end and pushing it upward. 6. Remove the bulb from the headlight as ...

Copyright © www.kicaman.com 2015-2019