Kia Carens: Remote keyless entry / Transmitter precautions

Kia Carens RP (2013-2018) Owners Manual / Features of your vehicle / Remote keyless entry / Transmitter precautions

✽ NOTICE

The transmitter will not work if any of following occur:

When the transmitter does not work correctly, open and close the door with the ignition key. If you have a problem with the transmitter, we recommend that you contact an authorized Kia dealer.

CAUTION

Keep the transmitter away from water or any liquid. If the keyless entry system is inoperative due to exposure to water or liquids, it will not be covered by your manufacturer vehicle warranty.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If the keyless entry system is inoperative due to changes or modifications not expressly approved by the party responsible for compliance, it will not be covered by your manufacturer’s vehicle warranty.

CAUTION

Keep the transmitter away from electromagnetic materials that blocks electromagnetic waves to the key surface.

Tailgate unlock (3)
1. Press the tailgate unlock button for more than 1 second. 2. The hazard warning light will blink twice to indicate the tailgate is unlocked. ✽ NOTICE After unlocking the tailgate, the tailgate w ...

Battery replacement
A battery should last for several years, but if the transmitter or smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use or replace the battery, w ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Rear Seat Belt Retractor Repair procedures


Replacement [Second row seat belt retractor]    • When installing the belt, make sure not to damage the retractor. 1. Remove the rear ...

Kia Carens RP (2013-2018) Service Manual: Description and operation


Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization ...

Copyright © www.kicaman.com 2015-2019