Kia Carens: Interior features / Seat warmer

Kia Carens RP (2013-2018) Owners Manual / Features of your vehicle / Interior features / Seat warmer

The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push the switch to warm the seat.

During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the “OFF” position.

✽ NOTICE

With the seat warmer switch in ON position, the heating system in the seat turns off or on automatically depending on the seat temperature.

CAUTION - Seat damage

WARNING - Seat warmer burns

Passengers should use extreme caution when using seat warmers due to the possibility of excess heating or burns. The occupants must be able to feel if the seat is becoming too warm and to turn the seat warmer off. The seat warmer may cause burns even at low temperatures, especially if used for long periods of time.

In particular, the driver must exercise extreme care for the following types of passengers:

1. Infants, children, elderly or disabled persons, or hospital outpatients

2. Persons with sensitive skin or those that burn easily

3. Fatigued individuals

4. Intoxicated individuals

5. Individuals taking medication that can cause drowsiness or sleepiness (sleeping pills, cold tablets, etc.)

Bottle holder
Bottles may be placed in the holder. ...

Air ventilation seat
The air ventilation is provided to cool the driver’s seat or front passenger's seat during hot weather by blowing air through small vent holes on the surface of the seat and seatback. While the e ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Drive Plate Repair procedures


Removal and Installation 1. Remove the automatic transaxle . (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the drive plate(A). Tightening torque : 71. ...

Kia Carens RP (2013-2018) Service Manual: Side Impact Sensor (SIS) Description and operation


Description Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH). Side Pressure Sensor is also called P-SIS because it detects ...

Copyright © www.kicaman.com 2015-2024