Kia Carens: Smart key / Smart key precautions
✽ NOTICE
- If, for some reason, you happen to lose your smart key, you will not
be able to start the engine. Tow the vehicle, if necessary, we recommend that
you contact an authorized Kia dealer.
- A maximum of 2 smart keys can be registered to a single vehicle. If you
lose a smart key, we recommend that you contact an authorized Kia dealer.
- The smart key will not work if any of the following occurs:
- The smart key is close to a radio transmitter such as a radio station or an
airport which can interfere with normal operation of the smart key.
- The smart key is near a mobile two-way radio system or a cellular phone.
- Another vehicle’s smart key is being operated close to your vehicle.
When the smart key does not work properly, open and close the door with the
mechanical key. If you have a problem with the smart key, we recommend that
you contact an authorized Kia dealer.
- If the smart key is in close proximity to your cell phone or smart phone,
the signal from the smart key could be blocked by normal operation of your cell
phone or smart phone. This is especially important when the phone is active
such as making call, receiving calls, text messaging, and/or sending/receiving
emails. Avoid placing the smart key and your cell phone or smart phone in the
same pants or jacket pocket and maintain adequate distance between the two devices.
CAUTION
Keep the smart key away from water or any liquid. If the keyless entry system
is inoperative due to exposure to water or liquids, it will not be covered by your
manufacturer’s vehicle warranty.
CAUTION
Keep the smart key away from electromagnetic materials that blocks electromagnetic
waves to the key surface.
1. Carry the smart key.
2. Press the tailgate handle switch.
3. The tailgate will unlock.
✽ NOTICE
Once the tailgate is opened and then closed, the tailgate will lock automatically.
The button wi ...
If the smart key does not operate normally, you can lock or unlock the doors
by using the mechanical key.
1. Press and hold the release button (1) and remove the mechanical key (2).
2. Insert the ke ...
Other information:
Signal Waveform
[NON-ISG]
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position
Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing
by using these signals.
Generally CkPS signal is used to dete ...
Component Location
1. Start Stop Button(SSB)
2. FOB key
3. Tailgate open switch
4. RF receiver
5. Interior antenna 1
6. Interior antenna 2
7. Smart key unit
8. Trunk antenna
9. Door handle & door antenna
10. Bumper antenna
...