Kia Carens: Body (Interior and Exterior) / Tail Gate
- Repair procedures
- Tail Gate Assembly Components and components location
- Tail Gate Assembly Repair procedures
- Tail Gate Trim Components and components location
- Tail Gate Trim Repair procedures
- Tail Gate Latch Components and components location
- Tail Gate Latch Repair procedures
- Tail Gate Back Panel Components and components location
- Tail Gate Back Panel Components and components location
- Tail Gate Lift Repair procedures
- Tail Gate Weatherstrip Repair procedures
Hood Latch Repair procedures
Replacement
[Hood upper latch assembly]
1.
After loosening the mounting bolt, then remove the hood upper latch
assembly (A).
Tight ...
Repair procedures
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail
gate by moving it up or down, or right or left.
2.
...
Other information:
Kia Carens RP (2013-2018) Service Manual: Drive Plate Repair procedures
Removal and Installation 1. Remove the automatic transaxle . (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the drive plate(A). Tightening torque : 71. ...
Kia Carens RP (2013-2018) Owners Manual: Air bag warning light
The purpose of the air bag warning light in your instrument panel is to alert you of a potential problem with your air bag - Supplemental Restraint System (SRS). When the ignition switch is turned ON, the warning light should illuminate for approximately 6 seconds, then go off. Have the system ch ...
Copyright © www.kicaman.com 2015-2022