Kia Carens: Tail Gate / Tail Gate Lift Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Lift Repair procedures

Replacement
  
Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.
1.
After loosening the mounting bolts, then remove the tail gate lifter (A).
Tightening torque:
6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

2.
Install in the reverse order of removal.
  
Make sure the tail gate locks and opens properly and locks securely.
Tail Gate Back Panel Components and components location
Component Location 1. Tail gate back panel ...

Tail Gate Weatherstrip Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A).    ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Special service tools


Special Service Tools Tool Name / Number Illustration Description Engine support fixture (bar) 09200-3N000 Used for holding engine assembly when removing / installing transaxle Used with the ...

Kia Carens RP (2013-2018) Service Manual: Front Driveshaft Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.3 ...

Copyright © www.kicaman.com 2015-2026