Other information:
Inspection
In the state of IGN1 ON, when the multi function switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
If IGN1 ON, The BCM monitors the range of this supply an ...
Follow the steps 1 to 2 from the previous chapter.
3. Remove the headlight bulb cover by turning it counterclockwise.
4. Disconnect the headlight bulb socket-connector.
5. Unsnap the headlight bulb retaining wire by depressing the end and pushing
it upward.
6. Remove the bulb from the headlight as ...