Kia Carens: Rear Door / Rear Door Belt Inside Weatherstrip Repair procedures
| 1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
| 2. |
Remove the rear door belt inside weatherstrip (A).

|
| 3. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
|
|
Replacement
1.
Pull down rear door window glass by pressing the power window glass
switch.
2.
After loosening the mounting screws, ...
Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m,14.5 ~ 21. ...
Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the cool position
when connecting 12V ...
Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
•
Use a 6mm hex bit to press the c ...