Kia Carens: Rear Door / Rear Door Belt Outside Weatherstrip Repair procedures
| 1. |
Pull down rear door window glass by pressing the power window glass
switch.
|
| 2. |
After loosening the mounting screws, then remove the rear door belt
outside weatherstrip (A).

|
| 3. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
|
|
Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2.
Remove the rear door outside ...
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside ...
Other information:
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.3 ~ ...
Specification
Item
Specification
Type
SILZKR6B10E
Gap
0.9 ~ 1.0 mm
(0.035 ~ 0.039 in.)
...