Kia Carens: Body Electrical System / Fuses And Relays

Air Ventilation Seat Control Unit Repair procedures

Removal Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the c ...

Components and components location

Component Location 1. Cooling fan relay (low) 2. Blower relay 3. IG2 relay 4. Deicer relay 5. Cooling fan relay (high) 6. Rear defogger relay ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Hood Latch Repair procedures

Replacement [Hood upper latch assembly] 1. After loosening the mounting bolt, then remove the hood upper latch assembly (A). Tightening torque : 7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft) ...

Kia Carens RP (2013-2018) Service Manual: In-car Sensor (DATC only) Description and operation

Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside tempera ...