Kia Carens: Seat Electrical / Power Seat Motor Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Seat Electrical / Power Seat Motor Repair procedures

Inspection
Power Seat Motor
1.
Disconnect the connectors for each motor.
(Refer to Body - "Front Seat Assembly")
A : Slide motor
B : Rear height motor
C : Extension motor
D : Front height motor
E : Recline motor
F : Lumbar support motor

2.
With the battery connected directly to the motor terminals, check if the motors run smoothly.
3.
Reverse the connections and check that the motor turns in reverse.
4.
If there is an abnormality, replace the motors.

Reclining Motor Limit Switch
1.
Disconnect the limit switch and operate the limit switch.
2.
Check for continuity between the terminals.
3.
Make sure that the seat operation is normal in the reverse after the maximum operation.
4.
If there is an abnormality, replace the limit switch.

Components and components location
Component Location 1. Front height motor 2. Extension motor 3. Slide motor 4. Rear height motor 5. Lumbar support motor 6. Recline motor 7. Ext ...

Power Seat Control Switch Schematic diagrams
Circuit Diagram ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Manifold Absolute Pressure Sensor (MAPS) Schematic diagrams


Circuit Diagram (M/T) (A/T) ...

Kia Carens RP (2013-2018) Service Manual: Canister Repair procedures


Removal 1. Lift the vehicle. 2. Disconnect the vapor hose quick-connector (A) and ventilation hose (B). 3. Remove the protector installation bolts (C) and then remove the canister. ...

Copyright © www.kicaman.com 2015-2026