Kia Carens: Lighting System / Turn Signal Lamp Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp Repair procedures

Removal

Door Mirror Turn Signal Lamp

1.	Disconnect the negative (-) battery terminal.

Remove the mirror holder (A) from the outside mirror assembly.

Be careful not to damage the fixing clip

3.	Remove the door mirror housing (A) after loosening a screw.

4.	Remove the door mirror cover (A).

5.	Loosen the mirror turn signal lamp mounting screw.

6.	Remove the door mirror turn signal lamp (B) after disconnecting the connector (A).

Side Repeater Lamp

1.	Remove the side repeater lamp (A) from the fender.

2.	Disconnect the connector (B) from the side repeater lamp.

Installation

Door Mirror Turn Signal Lamp

1.	Install the door mirror turn signal lamp.

2.	Install the door mirror cover and housing.

3.	Install the door mirror.

4.	Connect the negative (-) battery terminal.

Side Repeater Lamp

1.	Connect the connector and install the side repeater lamp.

Head Lamps Description and operation

HID Head Lamp 1. Bulb (1) Elements Xenon gas: Xenon gas activates the initial reaction for rapid illuminating. ...

Room Lamp Repair procedures

Inspection 1. Check that the switch operates properly after disconnecting the room lamp connector (A). Room Lamp Personal Lamp ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Seat belt warning

Driver’s seat belt warning (1) If the driver’s seat belt is unfastened after the ignition switch is ON, the seat belt warning light illuminates until the belt is fastened. If you continue not to fasten the seat belt and you drive over 9km/h, the illuminated warning light will start to blink u ...

Kia Carens RP (2013-2018) Service Manual: Heated Oxygen Sensor (HO2S) Specifications

Specification HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) Output Voltage(V) R ...