Kia Carens: Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specification
Item
Specification
Control type
N/L (Normal Low)
Control pressure kpa(kgf/cm², psi)
"9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Clea ...

26 Brake Control Solenoid Valve(26/B_VFS) Components and components location
Component Location 1. 26 Brake control solenoid valve (26/B_VFS) ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Adjusting the height up and down


To raise the headrest, pull it up to the desired position (1). To lower the headrest, push and hold the release button (2) on the headrest support and lower the headrest to the desired position (3). CAUTION If you recline the seatback towards the front with the headrest and seat cushion raised, ...

Kia Carens RP (2013-2018) Service Manual: Description and operation


Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the vehicle in the back and senses and sets off (visual and auditory) alarms for any vehicle coming into the blind spot. – ...

Copyright © www.kicaman.com 2015-2026