| •
|
Insert the SST between the oil pan and the ladder frame
by tapping it with a plastic hammer in the direction
of |
Components
1. Gasket
2. Oil screen
3. Oil pan
4. Drain plug gasket
5. Drain plug
...
Remove and Installation
When the oil sensor signal fault occurs, refer to the DTC guide.
1.
Drain the engine oil.
2.
Remove the oil ...
Other information:
Replacement
•
Prolonged and repeated contact with mineral oil will result
in the removal of natural fats from the skin, leading to dryness,
irritation and dermatitis. In a ...
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
3.
Remove the floor console.
(Refer to ...
Copyright © www.kicaman.com 2015-2021
| 
