Kia Carens: If you have a flat tire (with tire mobility kit) / Distributing the sealant

Kia Carens RP (2013-2018) Owners Manual / What to do in an emergency / If you have a flat tire (with tire mobility kit) / Distributing the sealant

12. Immediately drive approximately 7~10km (4~6miles or, about 10min) to evenly distribute the sealant in the tire.

CAUTION

Do not exceed a speed of 60 km/h (35 mph). If possible, do not fall below a speed of 20 km/h (12 mph).

While driving, if you experience any unusual vibration, ride disturbance or noise, reduce your speed and drive with caution until you can safely pull off of the side of the road. Call for road side service or towing.

When you use the Tire Mobility Kit, the tire pressure sensors and wheel may be stained by sealant.

Therefore, remove the tire pressure sensors and wheel stained by sealant and we recommend that inspect at an authorized Kia dealer.

Using the Tire Mobility Kit (TMK)

1. Detach the speed restriction label (0) from the sealant bottle (1), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too ...

Checking the tire inflation pressure

1. After driving approximately 7~10 km (4~6 miles or about 10 minutes), stop at a suitable location. 2. Connect connection hose (9) of the compressor directly to the tire valve. 3. Connect between co ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Engine Coolant Temperature Sensor (ECTS) Description and operation

Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that changes resistance with the temperature. The electrical resistance of the ECTS d ...

Kia Carens RP (2013-2018) Service Manual: Center Pillar Trim Components and components location

Component Location 1. Center pillar lower trim 2. Center pillar upper trim ...