Kia Carens: ABS(Anti-Lock Brake System) / Front Wheel Speed Sensor Repair procedures

Kia Carens RP (2013-2018) Service Manual / Brake System / ABS(Anti-Lock Brake System) / Front Wheel Speed Sensor Repair procedures

Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Disconnect the front wheel speed sensor connector (A), and then remove the front wheel speed sensor.

4.
Install in the reverse order of removal.
Front Wheel Speed Sensor Components and components location
Components 1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and components location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Low Tire Pressure Warning Light


This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When one or more of your tires are significantly underinflated. ❈For more details, refer to “Tire Pressure Monito ...

Kia Carens RP (2013-2018) Service Manual: Repair procedures


Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...

Copyright © www.kicaman.com 2015-2024