Kia Carens: Fuel Delivery System / Accelerator Pedal Repair procedures

Removal

1.	Turn the ignition switch OFF and disconnect the negative (-) battery cable.

2.	Disconnect the accelerator position sensor connector (A).

3.	Remove the installation bolt (B) and nuts (C), and then remove the accelerator pedal module.

Installation

Install in the reverse order of removal.

Accelerator pedal module installation bolt:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Accelerator pedal module installation nut:

12.7 ~ 15.6 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.5 lb-ft)

Removal 1. Remove the fuel filler neck assembly after unscrewing the mounting bolts (A). 2. Lift the vehicle. ...

Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and inject ...

Components 1. Gasket 2. Water pump 3. Water pump pulley ...

Component Location 1. Cowl cross bar assembly ...