Other information:
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the installation bolt (B) and nuts (C), a ...
To apply the EPB (Electronic parking brake):
Pull up the EPB switch.
Make sure the warning light comes on.
✽ NOTICE
On a steep incline or when pulling a trailer if the vehicle does not stand
still, do as follows:
1. Apply the EPB.
2. Pull up the EPB switch for more than 3 seconds.
CAUTION
Do not ...