Other information:
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the picture.
3. When aiming the low beam, vertical aiming should be adjusted after adjusting
the horizontal aiming.
4. If head lamp leveling device is equipped, adjust the head lamp l ...
The mode selection buttons control the direction of the air flow through the
ventilation system.
Air can be directed to the floor, dashboard outlets, or windshield. Three symbols
are used to represent Face, Floor and Defrost air position.
Face-Level (B, D, F*)
Air flow is directed toward the upp ...