Kia Carens: Heating and air conditioning / Fan speed control

The ignition switch must be in the ON position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flowing
from the ventilation system. To change the fan speed, turn the knob to the right
for higher speed or left for lower speed.
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated air position ...
To turn off the blowers, turn the fan speed control knob to the “0” position. ...
Other information:
Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform
is from the high side (feed side) of the #1 and #4 injectors, while the middle
waveform is from the low side (ground side) of the #1 injector and the bottom
waveform is from th ...
Replacement
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the roof trim assembly.
(Refer to Ro ...