Kia Carens: Heating and air conditioning / Air intake control

Kia Carens RP (2013-2018) Owners Manual / Features of your vehicle / Manual climate control system / Heating and air conditioning / Air intake control

The air intake control is used to select the outside (fresh) air position or recirculated air position.

To change the air intake control position, press the control button.

Recirculated air position

With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

Outside (fresh) air position

With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

✽ NOTICE

Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale.

In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.

WARNING

Temperature control
The temperature control knob allows you to control the temperature of the airflow in the vehicle. To change the temperature: Turn the knob to the right to increase temperature. Turn the knob to t ...

Fan speed control
The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan spe ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Tire rotation


To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pre ...

Kia Carens RP (2013-2018) Service Manual: Cooling Fan Specifications


Specifications Item Specification Motor capacity (W) 170 230 Fan type Puller Fan speed control Resistor (HI-LOW-OFF) Air flow rate [㎥/h ( ...

Copyright © www.kicaman.com 2015-2019