Other information:
Wiper Setting Position Calibration Mode (Teach-In)
; If the assembled wiper arm is not lined up with the mark on the windshield,
activate the opposite electronic motor wiper arm and set the blade setting position
in teach-in mode to move the wiper arm to the correct position.
1 ...
1. Pull the wheel guard down by rotating the screws.
2. Reach your hand into the back of the front bumper.
3. Disconnect the power connector from the socket.
4. Remove the bulb-socket from the housing by turning the socket counter clockwise
until the tabs on the socket align with the slots on the ...