Kia Carens: Air conditioning System / Auto Defogging Sensor (DATC only) Repair procedures
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC
guide.
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the ECM mirror cover (A).

|
| 3. |
Push the ECM mirror base up to remove the auto defog sensor & rain sensor
cover (A).


|
| 4. |
Disconnect the connector (A) and then remove the auto defogging sensor
(B).

|
| 5. |
Install in the reverse order of removal.
|
Description
The auto defogging sensor is installed on the front window glass. The sensor
judges and sends signal if moisture occurs to blow out wind for defogging. The
air condit ...
Description
The cluster ionizer makes disinfection and decomposition of bad smell from the
air-conditioner or inflow air. And it cleans the inside air of a vehicle.
When the i ...
Other information:
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module
and detects the rotation angle of the accelerator pedal. The APS is one of the
most important sensors in engine control system, so it consists of the two sensors
which adapt individual ...
Description
•
The inhibitor switch is installed on top of transaxle, and is connected
to the shift lever by a shift cable.
•
Inhibitor switch signals (S1, S2, S3, S4) are transmitted to the TCM
according to the driver' ...