Kia Carens: Front light replacement / Turn signal light
.png)
Follow the steps 1 to 2 from the previous page.
3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise
until the tabs on the bulb align with the slots in the socket. Pull the bulb out
of the socket.
5. Insert a new bulb by inserting it into the socket and rotating it until it
locks into place.
6. Install the socket in the assembly by aligning the tabs on the socket with
the slots in the assembly. Push the socket into the assembly and turn the socket
clockwise.
If the light does not operate, we recommend that the system be checked by an
authorized Kia dealer.
WARNING - HID Headlight low beam (if equipped)
Do not attempt to replace or inspect the low beam (X ...
1. Pull the wheel guard down by rotating the screws.
2. Reach your hand into the back of the front bumper.
3. Disconnect the power connector from the socket.
4. Remove the bulb-socket from the housi ...
Other information:
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the battery (A) and ECM (B).
3.
Disconnect the brake fluid level switch connector (A), and remove the ...
This indicator light illuminates:
• When the vehicle detects the immobilizer in your key properly while the ignition
switch is ON.
- At this time, you can start the engine.
- The indicator light goes off after starting the engine.
This indicator light blinks:
• When there is a malfunction with ...