Kia Carens: Front light replacement / Front fog light
.png)
1. Pull the wheel guard down by rotating the screws.
2. Reach your hand into the back of the front bumper.
3. Disconnect the power connector from the socket.
.png)
4. Remove the bulb-socket from the housing by turning the socket counter clockwise
until the tabs on the socket align with the slots on the housing.
5. Install the new bulb-socket into the housing by aligning the tabs on the socket
with the slots in the housing. Push the socket into the housing and turn the socket
clockwise.
6. Connect the power connector to the socket.
Follow the steps 1 to 2 from the previous page.
3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
4. Re ...
Other information:
Description
•
The sensor used is a thermistor (NTC) in which resistance changes with
temperature variation.
•
The TCM supplies about 5 voltage to the sensor; the output value changes
with ATF temperature.
...
Inspection
Component Inspection
1.
Remove the ignition lock switch.
2.
Push the ignition lock switch in the direction of the arrow to make
sure that continuity between terminals. (refer to the table below)
...