Other information:
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the picture.
3. When aiming the low beam, vertical aiming should be adjusted after adjusting
the horizontal aiming.
4. If head lamp leveling device is equipped, adjust the head lamp l ...
Select “Driving Assist“ under "User Settings“ and click “Rear Collision
Warning” to select “Rear Cross Traffic Alert” on the instrument cluster. Then,
the system will turn on and stand by to be activated.
Unclick “Rear Cross Traffic Alert” again, to turn the system off.
If ...