Kia Carens: Automatic Transaxle Control System / Inhibitor Switch Specifications

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Specifications

Specification

Item	Specification
Power supply (V)	12
Output type	Combination of output signals

Signal Code Table

	P	P-R	R	R-N	N	N-D	D
Signal "1"	12 V	12 V	0	0	0	0	0
Signal "2"	0	12 V	12 V	12 V	0	0	0
Signal "3"	0	0	0	12 V	12 V	12 V	0
Signal "4"	0	0	0	0	0	12 V	12 V

SS-B Solenoid Valve(ON/OFF) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Clea ...

Inhibitor Switch Description and operation

Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable. • I ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: User Settings Mode

Description On this mode, you can change setting of the doors, lamps, and so on. WARNING Do not adjust the User Setting while driving.You may lose your steering control and cause severe personal injury or accidents. Driving Assist (if equipped) • Rear Cross Traffic Alert (if equipped) : If this ...

Kia Carens RP (2013-2018) Service Manual: Smart Key Repair procedures

Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart key c ...