Kia Carens: Seat Electrical / Seat Heater (Non-Air Ventilation) Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Seat Electrical / Seat Heater (Non-Air Ventilation) Repair procedures

Inspection

First Row Seat

Check for continuity and measure the resistance between terminals.

Connector A		Connector B
No.	Description	No.	Description
1	Heater (+)	2	Heater (+)
2	NTC (-)	8	NTC (+)
3	NTC (+)	15	Heater (-)
4	Heater (-)	21	NTC (-)

Standard value (Fabric / Leather)

Cushion : 1.34 Ω ± 10%

Back : 1.05 Ω ± 10%

Set : 2.39 Ω ± 10%

Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

	1st	2nd	3rd
Cushion (±2°C/ ±35.6°F)	36°C (96.8°F)	39°C (102.2°F)	42°C (107.6°F)
Back (±2°C/ ±35.6°F)	40°C (104°F)	45°C (113°F)	50°C (122°F)

Second Row Seat

Check for continuity and measure the resistance between terminals.

Type		Connector		Resistance
Type		LH	RH	Resistance
6:4	5 P	17-14	3-6	4.57Ω ± 10%
6:4	7P	17-14	3-6	4.79Ω ± 10%
1:1:1		17-14	3-6	4.79Ω ± 10%

Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

	1st	2nd
Cushion (±2°C / ±35.6°F)	36.2°C (97.2°F)	69.0°C (156.2°F)

Seat Heater (Non-Air Ventilation) Schematic diagrams

Circuit Diagram [First Row Seat] [Second Row Seat] ...

Seat Heater (Air Ventilation) Components and components location

Components ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Rear Shock Absorber Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 10 ...

Kia Carens RP (2013-2018) Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation

Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calcul ...