Kia Carens: Outside rearview mirror / Remote control

Kia Carens RP (2013-2018) Owners Manual / Features of your vehicle / Mirrors / Outside rearview mirror / Remote control

The electric remote control mirror switch allows you to adjust the position of the left and right outside rearview mirrors.

To adjust the position of either mirror, move the lever (1) to R (Right) or L (Left) to select the right side mirror or the left side mirror, then press a corresponding point on the mirror adjustment control to position the selected mirror up, down, left or right.

After adjustment, put the lever into neutral (center) position to prevent inadvertent adjustment.

CAUTION

The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, the motor may be damaged.
Do not attempt to adjust the outside rearview mirror by hand. Doing so may damage the parts.

Outside rearview mirror

Be sure to adjust mirror angles before driving. Your vehicle is equipped with both left-hand and right-hand outside rearview mirrors. The mirrors can be adjusted remotely with the remote switch. The ...

Folding the outside rearview mirror

Manual type To fold outside rearview mirror, grasp the housing of mirror and then fold it toward the rear of the vehicle. Electric type The outside rearview mirror can be folded or unfolded by pres ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Battery saver function

The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key (Smart key : turns off the engine) and opens the driver- side door. With this feature, the parking lights will be turne ...

Kia Carens RP (2013-2018) Service Manual: PAB ON/OFF Switch Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the crash pad side cover. ( ...