Kia Carens: Rear Seat / Rear Seat Cushion Cover Components and components location

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Cushion Cover Components and components location

Component Location

[Second row seat assembly]

(Except Europe and Australia)

[5-seat vehicle]

1. Rear seat cushion cover

(Except Europe and Australia)

[7-seat vehicle]

1. Rear seat cushion cover [LH]

2. Rear seat cushion cover [RH]

(For Europe and Australia)

[5/7-seat vehicle]

1. Rear seat cushion cover [LH]
2. Rear seat cushion cover [RH]

3. Rear seat cushion cover [Center]

[Third row seat assembly]

1. Rear seat cushion cover [LH]

2. Rear seat cushion cover [RH]

Rear Seat Back Cover Repair procedures

Replacement [Second row seat assembly] (Except Europe and Australia) [5-seat vehicle] (LH) ...

Rear Seat Cushion Cover Repair procedures

Replacement [Second row seat assembly] (Except Europe and Australia) [5-seat vehicle] ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Steering Angle Sensor Description and operation

Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses the signals from th ...

Kia Carens RP (2013-2018) Service Manual: Schematic diagrams

Schematic Diagram 1. CAN 2. MIL lamp 3. Immobilizer 4. Canister 5. Purge control solenoid valve 6. Manifold absolute pressure sensor 7. Throttle position sensor (ETC module included) 8. ETC motor 9. Injector 10. Knock sensor 11. Ig ...