Kia Carens: SRSCM / Side Impact Sensor (SIS) Description and operation

Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH).

Side Pressure Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.

Side Impact Sensor is also called A-SIS because it detects acceleration.

SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred.

Front Impact Sensor (FIS) Repair procedures

Removal    • Removal of the airbag must be performed according to the precautions/ ...

Side Impact Sensor (SIS) Components and components location

Components ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Components and components location

Components 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Cowl side trim 6. Front door scuff trim 7. Rear door scuff trim 8. Front door step trim 9. Rear door step trim ...

Kia Carens RP (2013-2018) Service Manual: High Pressure Fuel Pump Repair procedures

Removal    In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair w ...