Kia Carens: Automatic Transaxle Control System / Output Speed Sensor Description and operation

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Description and operation

Description

•	Output speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation.

•	Output speed sensor (A) and input speed sensor are integrated and installed in the transaxle.

Functions

•	Measures the rate of rotation of the output shaft inside the transaxle and delivers the readings to the TCM.

•	The sensor provides critical input data used in feedback control, torque converter clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air clea ...

Output Speed Sensor Specifications

Specifications ▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.85 ~ 1 ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between ...

Kia Carens RP (2013-2018) Service Manual: Cruise Control Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 3. Remove the steerin ...