Kia Carens: Turn signals and lane change signals / One-touch lane change function
To activate an one-touch lane change function, move the turn signal lever slightly
and then release it. The lane change signals will blink 3, 5 or 7 times.
You can choose one-touch lane change blinking function in “One touch turn lamp”
of “User setting”. Refer to “User setting” in chapter 4.
✽ NOTICE
If an indicator flash is abnormally quick or slow, bulb may be burned out
or have a poor electrical connection in the circuit.
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn signa ...
Fog lights are used to provide improved visibility when visibility is poor due
to fog, rain or snow, etc.
1. Turn on the park light.
2. Turn the light switch (1) to the front fog light position.
3. ...
Other information:
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir
tank with water.
Before filling the reservoir tank with water, check ...
Troubleshooting
Trouble Symptom
Probable cause
Remedy
Vehicle pulls to one side
Scoring of driveshaft ball joint
Replace
Wear, rattle or scoring of wheel bearing
Replace
Defective front suspens ...