Kia Carens: Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Kia Carens RP (2013-2018) Service Manual / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification

Pressure [kPa (kgf/cm², psi)]	Output Voltage (V)
20.0 (0.20, 2.9)	0.79
46.7 (0.47, 6.77)	1.84
101.3 (1.03, 14.7)	4.0

Manifold Absolute Pressure Sensor (MAPS) Description and operation

Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfer ...

Manifold Absolute Pressure Sensor (MAPS) Troubleshooting

Signal Waveform ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Accelerator Pedal Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Remove the installation bolt (B) and nuts (C), a ...

Kia Carens RP (2013-2018) Service Manual: Blind Spot Detection Radar Calibration Description and operation

Description To correctly sense vehicles on the neighboring lanes using the radar, the direction of the sensor and the direction of the vehicle must be aligned. This is the BSD unit alignment. If this alignment is not performed as in illustration below, it may cause degrada ...