Kia Carens: Blind Spot Detection system (BSD) / Blind Spot Detection Indicator Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Blind Spot Detection system (BSD) / Blind Spot Detection Indicator Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the mirror (A) from the mirror holder.

3.	Disconnect the heating connectors and BSD indicator connector from the mirror.

Installation

1.	Install the mirror after connecting the connectors.

2.	Connect the negative (-) battery terminal.

Inspection

1.	Verify that the mirror operates properly as shown in the below table.

Blind Spot Detection Indicator Components and components location

Components 1. BSD warning lamp 2. Side repeater lamp 3. Puddle lamp ...

Heating,Ventilation And Air Conditioning

...

Other information:

Kia Carens RP (2013-2018) Service Manual: Seat Belt Pretensioner (BPT) Description and operation

Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the sea ...

Kia Carens RP (2013-2018) Service Manual: Rain Sensor Repair procedures

Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...