Kia Carens: Using a child restraint system / Installing a child restraint system with a lap/shoulder belt

Kia Carens RP (2013-2018) Owners Manual / Safety features of your vehicle / Child restraint system / Using a child restraint system / Installing a child restraint system with a lap/shoulder belt

To install a child restraint system on the seat, do the following:

1. For stable and safe installation of child restraint system, adjust the vehicle seat (seatback angle and/or seat forward and backward) so that your child can fit in the child restraint system in a comfortable manner. To properly accommodate child restraint systems in all adjustment positions, the front passenger seat may be moved rearwards with the seat back not passing beyond the seat belt shoulder anchor.

Place the child restraint system in the seat and route the lap/shoulder belt around or through the child restraint system, following the child restraint system manufacturer’s instructions. Be sure the seat belt webbing is not twisted.

2. Fasten the lap/shoulder belt latch into the buckle. Listen for the distinct “click” sound.

Position the release button so that it is easy to access in case of an emergency.

3. Buckle the seat belt and allow the seat belt to take up any slack. After installation of the child restraint system, try to move it in all directions to be sure the child restraint system is securely installed.

If you need to tighten the belt, pull the webbing toward the retractor. When you unbuckle the seat belt and allow it to retract, the retractor will automatically revert back to its normal seated passenger emergency locking usage condition.

Using a child restraint system
For small children and babies, the use of a child restraint system is required. The child restraint system should be of appropriate size for the child and should be installed in accordance with the ...

Suitability of each seating position for "universal" category belted child restraint systems according to ECE regulations
Use child restraint systems that have been officially approved and are appropriate for your children. When using the child restraint systems, refer to the following table. U : Suitable for "universa ...

Other information:

Kia Carens RP (2013-2018) Service Manual: UIP(Ultrasonic Intrusion Protection) Sensor Repair procedures


Removal OFF switch 1. Remove the overhead console lamp. (Refer to Lighting System - "Overhead Console Lamp") Installation OFF switch 1. Install the overhead console lamp. (Refer to Lighti ...

Kia Carens RP (2013-2018) Service Manual: Auto Light Sensor Repair procedures


Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. If IGN1 ON, The BCM monitors the range of this supply an ...

Copyright © www.kicaman.com 2015-2019