Kia Carens: Engine Control System / Injector Specifications

Kia Carens RP (2013-2018) Service Manual / Engine Control / Fuel System / Engine Control System / Injector Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.5 [20°C(68°F)]

Injector Description and operation
Description The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fue ...

Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Ambient Temperature Sensor Description and operation


Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used ...

Kia Carens RP (2013-2018) Service Manual: Description and operation


Description This specification applies to HCU(Hydraulic Control Unit) and ECU(Electronic Control Unit) of the HECU.(Hydraulic and Electronic Control Unit) This specification is for the wiring design and installation of ABS/ESP ECU. This unit has the functions as follows ...

Copyright © www.kicaman.com 2015-2023