Kia Carens: Lighting System / High Mounted Stop Lamp Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp Repair procedures

Removal
High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler.
(Refer to Body - "Rear Spoiler")
3.
Remove the high mounted stop lamp assembly (A) after loosening screws (4EA).

Installation
1.
Install the high mounted stop lamp.
2.
Install the rear spoiler.
3.
Connect the negative (-) battery terminal.
License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after loosening the mounting screw. ...

Luggage Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the luggage lamp (A). ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Description and operation


Description Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill and the clutch is not operated and starts it again as soon as the clutch is operated. This not only reduces fuel consumption, it also lowers emissions.Idle Sto ...

Kia Carens RP (2013-2018) Service Manual: Repair procedures


Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...

Copyright © www.kicaman.com 2015-2020