Kia Carens: Lighting System / License Lamps Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Lighting System / License Lamps Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp assembly (A) after loosening the mounting screw.

3.
Replace the bulb (B) after removing the license lamp (A).

Installation
1.
Install the bulb.
2.
Install the license lamp assembly.
Fog Lamps Repair procedures
Inspection Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as ...

High Mounted Stop Lamp Repair procedures
Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Hood Latch Repair procedures


Replacement [Hood upper latch assembly] 1. After loosening the mounting bolt, then remove the hood upper latch assembly (A). Tightening torque : 7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft) ...

Kia Carens RP (2013-2018) Service Manual: Variable Intake Solenoid (VIS) Valve Description and operation


Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table). ...

Copyright © www.kicaman.com 2015-2024