Kia Carens: Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Removal

1.	Disconnect the negative(-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel")

3.	Remove the steering column upper and lower shrouds. (Refer to Body - "Steering Column Shroud Panel")

4.	Disconnect the electronic steering column lock connector (A).

5.	Remove the electronic steering column lock. (Refer to Steering System - "Steering Column And Shaft")

Installation

Install the electronic steering column lock (A).

Do not reuse the shear bolts.

When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.

Tightening torque :

7 ~ 13 N.m (0.7 ~ 1.3 kgf.m, 5 ~ 9.4 lb.ft)

2.	Install the steering column.

3.	Install the crash pad lower panel.

ESCL(Electronic Steering Column Lock) Components and components location

Component ...

Front / Rear Parking Assist System

...

Other information:

Kia Carens RP (2013-2018) Service Manual: Engine Coolant Temperature Sensor (ECTS) Specifications

Specification Temperature Resistance (kΩ) °C °F -40 -40 48.14 -20 -4 14.13 ~ 16.83 0 32 5.79 ...

Kia Carens RP (2013-2018) Service Manual: PAB ON/OFF Switch Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the crash pad side cover. ( ...