Kia Carens: Headlight leveling device / Automatic type
It automatically adjusts the headlight beam level according to the number of
passengers and loading weight in the luggage area.
And it offers proper headlight beam under various conditions.
WARNING
If it does not work properly even though your vehicle is inclined backward
according to passenger's posture, or the headlight beam is irradiated to the high
or low position, we recommend that the system be inspected by an authorized Kia
dealer.
Do not attempt to inspect or replace the wiring yourself.
To adjust the headlight beam level according to the number of the passengers
and the loading weight in the luggage area, turn the beam leveling switch.
The higher the number of the switch is positio ...
A :Wiper speed control (front)
· MIST/ – Single wipe
· OFF / O – Off
· INT / --- – Intermittent wipe
AUTO* – Auto control wipe
· LO / 1 – Low wiper speed
· HI / 2 – High wiper speed
...
Other information:
1. Remove the lens retaining screws with a philips head screwdriver.
2. Remove the socket from the assembly by turning the socket conterclockwise.
3. Remove the bulb by pulling it straight out.
4. Install the socket into the assembly by aligning the tabs on the socket with
the slots on the assembl ...
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds
- It remains on if the parking brake is applied.
When the parking brake is applied.
When the brake fluid level in the reservoir is low. ...