Symptom
|
Suspect area
|
Engine will not start or struggle to start
|
Vapor hose damaged or disconnected
|
Engine struggles to start
|
Malfunction of the Purge Control Solenoid Valve
|
Rough idle or engine stalls
|
Vapor hose damaged or disconnected
|
Malfunction of the PCV valve
|
Rough idle
|
Malfunction of the Evaporative Emission Control System
|
Excessive oil consumption
|
Positive crankcase ventilation line clogged
|
Other information:
Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC
guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the ECM mirror cover (A).
...
This indicator will illuminate when the engine enters the Idle Stop mode of the
ISG (Idle Stop and Go) system.
When the automatic starting occurs, the auto stop indicator on the cluster will
blink for 5 seconds.
✽ NOTICE
When the engine automatically starts by the ISG system, some warning light ...