Kia Carens: Auto Lighting Control System / Auto Light Switch Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Auto Lighting Control System / Auto Light Switch Repair procedures

Inspection
1.
Operate the auto light switch, then check for continuity between terminals of multi-function switch connector.
[LHD]

[RHD]

Schematic diagrams
Circuit Diagram ...

Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled accor ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures


Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between ...

Kia Carens RP (2013-2018) Owners Manual: Windshield wipers


When the wiper blade is not in a normal position, place the ignition switch in the ON position. The wiper blade will return to the normal position. Following are cases a wiper blade may be in an abnormal position. - The wiper blade may be positioned abnormally when in an automatic vehicle wash. ( ...

Copyright © www.kicaman.com 2015-2026