Kia Carens: Air conditioning System / A/C Pressure Transducer Description and operation

The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very low irregularly to optimize air conditioning system.

Receiver-Drier Repair procedures

Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). ...

A/C Pressure Transducer Repair procedures

Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Ignition Coil Specifications

Specification Item Specification Primary Coil Resistance (Ω) 0.79 ± 15％ [20°C (68°F)] Secondary Coil Resistance (kΩ) 5.9 ± 15％ [20°C (68°F)] ...

Kia Carens RP (2013-2018) Service Manual: Cooling Fan Components and components location

Components 1. Cooling fan 2. Fan motor 3. Cooling fan shroud 4. Cooling fan resistor ...