Kia Carens: Starting System / Starter Specifications

Kia Carens RP (2013-2018) Service Manual / Engine Electrical System / Starting System / Starter Specifications

Specification
▷ Without ISG system
Item
Specification
Rated voltage
12 V, 0.9 kW
The number of pinion teeth
10
Performance
[No-load, 11.5 V]
Ampere
Max. 60 A
Speed
Min. 5,500 rpm

▷ With ISG system
Item
Specification
Rated voltage
12 V, 1.3 kW
The number of pinion teeth
11
Performance
[No-load, 11.5 V]
Ampere
Max. 95 A
Speed
Min. 3,400 rpm

Starter Description and operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connecti ...

Starter Components and components location
Components 1. Screw 2. Front housing 3. Stop ring 4. Stopper 5. Overrunning clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet sw ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Engine Control Module (ECM) Repair procedures


Removal    When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutral mod ...

Kia Carens RP (2013-2018) Owners Manual: Headlight (Low, HID type), Position light/DRL (LED type)


If the light does not operate, we recommend that the system be checked by an authorized Kia dealer. WARNING - HID Headlight low beam (if equipped) Do not attempt to replace or inspect the low beam (XENON bulb) due to electric shock danger. If the low beam (XENON bulb) is not working, we recommend ...

Copyright © www.kicaman.com 2015-2020