Kia Carens: Button Engine Start System / Start/Stop Button Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Repair procedures

Removal
1.
Disconnect the negative(-) battery terminal.
2.
Using a screwdriver or remover, remove the crash pad center garnish (A).

3.
Disconnect the start/stop button connector (A).

4.
Remove the start/stop button (A) after removing the screws (3EA).

Installation
1.
Install the start/stop button.
2.
Install the crash pad center garnish.
3.
Connect the negative (-) battery terminal.
Start/Stop Button Components and components location
Component ...

ESCL(Electronic Steering Column Lock) Components and components location
Component ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Power Door Lock Actuators Repair procedures


Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. Remove the front door module. (Refer to Body - "Front Door Module") ...

Kia Carens RP (2013-2018) Owners Manual: Using the transmitter


Park the vehicle and stop the engine. Arm the system as described below. 1.Turn off the engine and remove the ignition key from the ignition switch. 2.Make sure that all doors, the engine hood and tailgate are closed and latched. 3.Lock the doors by pressing the lock button on the transmitter. After ...

Copyright © www.kicaman.com 2015-2026