Kia Carens: Airbag Module / Side Airbag (SAB) Module Description and operation
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module
(squib) even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result
in serious personal injury.
|
Removal
1.
Disconnect the battery negative cable and wait for at least thirty seconds
before beginning work.
2.
Remove the glove bo ...
Other information:
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure
Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air temperature is needed
because air density varies according to the temperat ...
Wiper Setting Position Calibration Mode (Teach-In)
; If the assembled wiper arm is not lined up with the mark on the windshield,
activate the opposite electronic motor wiper arm and set the blade setting position
in teach-in mode to move the wiper arm to the correct position.
1 ...