Kia Carens: Blade replacement / Rear window wiper blade
.png)
1. Raise the wiper arm and pull out the wiper blade assembly.
.png)
2. Install the new blade assembly by inserting the center part into the slot
in the wiper arm until it clicks into place.
3. Make sure the blade assembly is installed firmly by trying to pull it slightly.
To prevent damage to the wiper arms or other components, we recommend that the
wiper blade be replaced by an authorized Kia dealer.
Type A
1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic
locking clip.
CAUTION
Do not allow the wiper arm to fall against the windshield, since it may chip
or crack the ...
Other information:
Troubleshooting
Symptom
Possible cause
Remedy
One lamp does not light
(all exterior)
Bulb burned out
Replace bulb
Socket, wiring or ground faulty
Repair if necessary
...
You should always attach chains between your vehicle and your trailer. Cross
the safety chains under the tongue of the trailer so that the tongue will not drop
to the road if it becomes separated from the hitch. Instructions about safety chains
may be provided by the hitch manufacturer or by the ...