Kia Carens: Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the mirror wiring cover (A).

3.	Push the ECM mirror base up to remove the auto defog sensor & rain sensor cover (A).

4.	Remove the LDWS unit (B) after disconnecting the connector (A).

Installation

1.	Install the LDWS unit.

Install the LDWS unit cover.

After replacing the LDWS unit, It is necessary to operate the Variant Coding procedure and Calibration procedure.

a.	Using the GDS tool, select the Variant Coding menu of LDWS and select the RHD or LHD.

b.	Using the GDS tool, operate the Calibration menu of LDWS.

c.	Ignition OFF and ON.

d.	Check the normal operation of LDWS.

3.	Check LDWS system operation.

Lane Departure Warning System (LDWS) Unit Components and components location

Components ...

Anti-theft System

...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Warning type

If an approaching vehicle detected by sensors, the warning is chime and the warning light will blink on the outside rearview mirror. The system will notify the driver through LCD. If the detected vehicle is out of detection range, moving away in the opposite direction or moving slow, the w ...

Kia Carens RP (2013-2018) Service Manual: Front Strut Assembly Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ ...